Impres 2 Battery Reconditioning:
This leaves 51 units remaining in the building (or 51% of the total salable). The freehold rights to these units are reserved for Thai nationals in what is commonly referred to as the Thai quota. In this example, 49 of the total units in this building (or 49% of the total salable area) can be owned outright by non-thai nationals in their name.
Designed by Motorola solutions for their two-way radio equipment, IMPRES batteries provide automatic, adaptive reconditioning, end-of-life display and other advanced features. Data is stored in the battery and communicated to the charger via a unique IMPRES communication. If the battery needs reconditioning, the charger automatically indicates a STEADY YELLOW. Only manually recondition batteries when you feel it’s absolutely necessary, excessive use of the manual recondition process can significantly reduce the cycle life of your battery.
Motorola’s innovative IMPRES battery charging and reconditioning system streamlines and automates battery maintenance. IMPRES radio batteries and chargers communicate to help lengthen battery life so you can be assured your radio battery is ready when you are. via Reconditioning too often can result in wasted battery cycles while reconditioning not enough can reduce battery performance and have a shorter life span. A reconditioning charger will have the ability to determine when is appropriate to recondition batteries.
It then starts the recondition process where it goes through several charging cycles, each time bringing it to a better capacity than before. To manually recondition batteries, within 2 ‘ minutes after placing your battery on a reconditioning charger, take the battery off the charger and immediately place it back in. This will start the reconditioning process and your charger should indicate a steady orange light. When a battery is placed on a reconditioning charger, the charger determines if the battery needs to be reconditioned, and automatically starts the process. This helps eliminate unnecessary reconditioning charges and helps the battery’s cycle life.
Reconditioning is a process where a rechargeable battery undergoes several cycles to bring it back to a better capacity and reset its memory effect. Reconditioning batteries helps eliminate and fix this memory effect. IMPRES 2 is a next-generation energy system designed for APX series radios. IMPRES 2 lets you charge batteries up to 40% faster, customize charging to extend battery life and manage power with enhanced diagnostics. IMPRES radio batteries and chargers communicate to help lengthen battery life and extend talk time, so you can be assured your radio battery is ready when you go out on a call.
At any time during the reconditioning process of a Motorola IMPRES battery (STEADY YELLOW indication), reconditioning may be terminated by removing and reinserting the battery back into the charger within 5 seconds. This causes the charger to terminate the reconditioning process and begin the charging process. The charger will attempt to recondition the battery at the next battery insertion. It’s important to note that even though reconditioning chargers help prolong the life of your battery, it’s not a permanent solution and two-way radio batteries should be replaced every 18 to 24 months. At any time during the reconditioning process of a Motorola IMPRES battery STEADY YELLOW reconditioning may be terminated by removing and reinserting the battery back into the charger within 5 seconds. A Motorola IMPRES battery must be initialized by an IMPRES charger the first time it is charged.
Reconditioning also saves you money by not having to purchase replacement batteries more frequently. Reconditioning charger analyzers, like the Waveband WI-80, will tell you the true state of your battery so you know exactly when more info its time to replace. It’s important to properly care for your two-way radio battery to be sure you get the longest life and best performance. When you take it off the charger your battery is fully charged and reconditioned.
This process may take up to 12 hours to complete, depending upon the state of charge and capacity rating of the battery when it is inserted. Looking to purchase a reconditioning charger for your two-way radio fleet? Waveband Communications offers charger analyzers that recondition batteries and provide you with critical data on the life of your battery. Shop now or contact sales to find the right solutions for your team. When you first place your radio battery on a reconditioning charger, like the Motorola Impres Reconditioning Charger or Waveband WI-80 Analyzer, it fully depletes your radio battery of any power.
Motorola IMPRES Adaptive Chargers, when used in conjunction with a Motorola IMPRES battery, have the ability to determine the appropriate time to recondition the battery. When an IMPRES battery is properly inserted into the charger, the charger determines if it active is appropriate to recondition the battery. It is important to note, for this process to be effective, the IMPRES battery must be allowed to complete the recondition/recharge process. Leave the battery in the charger until the charger indicates a STEADY GREEN.
The ownership titles of these 49 units is referred to as Freehold or Foreign Quota. We have highlighted in the below chart what the key indicators mean on your chargers. A key is for the lighting sequences are found underneath single chargers and on the top of multi chargers. This high-visibility, high impact green RSM is designed to provide loud and clear audio in extreme environments. The APX 8000XE redefines mission critical communications by delivering an extreme radio that combines unlimited mobility, loud audio and secure Wi-Fi connectivity. With her experience in critical communications, she helped public safety clients enhance their team communication through the help of two-way radio accessories.
At the completion of the recondition cycle, the charger automatically recharges the IMPRES battery. Within 2 ‘ minutes of the initial insertion of an IMPRES battery (STEADY RED indication), remove and reinsert the battery within 5 seconds to manually force reconditioning to occur. This forces the charger to recondition and automatically recharge the battery. This is a useful feature to have when IMPRES batteries have been in storage for several months or longer. Two or three manual recondition cycles may be required to rejuvenate the batteries, due to long-term storage conditions.
You can close this message and continue as a guest or sign in again before proceeding. This process requires approximately 12 hours depending on the capacity. Do not remove the battery from the charger until the STEADY GREEN light is on.
Within 2-1/2 minutes of the initial insertion of an IMPRES battery (STEADY RED indication), remove and reinsert the battery within 5 seconds to manually force reconditioning to occur. Two or three manual recondition cycles may be required to rejuvenate the batteries, due to long term storage conditions. It’s a next-generation energy system that’s safer and smarter, while keeping you powered for even longer. And manage power more intelligently with enhanced diagnostics, so you get the most from each battery. For 10 years, IMPRES radio batteries have been there when it mattered most.